| Model 230VAC,50/60Hz/ 120VAC,50/60Hz |
Order | Heat out put (W) |
Airflow(m3/h) | Pre-fuse T (time-delay) 230VAC/ 120VAC | WxHxD(mm) | Weight (kg) |
| JRQFM100BA | 2020.010 | 100W | 33 | 1/1.4A | 80x 112x22mm | 0.4 |
| JRQFM150BA | 2020.011 | 150W | 33 | 1.25/2A | 80x 112x22mm | 0.4 |
| JRQFM200BA | 2020.012 | 200W | 120 | 1.4/2.5A | 119x151x22mm | 0.5 |
| JRQFM300BA | 2020.013 | 300W | 120 | 2/4A | 119x151x22mm | 0.5 |
| Technical data | |
| Heating element | high performance cartridge |
| Temperature safety cut-out | to protect against overheating in case of fan failure, automatic reset |
| Heater body | die-cast aluminium (glass bead blasted) |
| Electrical connection | 3-pole screw connector 2.5mm2, clamping torque 0.8Nm max |
| Connection casing | plastic according to UL94 V-0, black |
| Installation | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up) |
| Operating / storage areas | -45P 〜+75°C(-49°F~+158°F) |
| Operating / Storage humidity | max. 90% RH (non-condensing) |
| Protection class | IP20(earthed) |
| Axial fan, ball bearing | airflow see table service life 50,000h at 25°C(77°F) |
| Connection (axial fan) | 2-pole screw connector 2.5mm2 (L2/N2) |
| Model | Order No | ||
| JRQFM100BA | 2020.010 | ||
| JRQFM150BA | 2020.011 | ||
| JRQFM200BA | 2020.012 | ||
| JRQFM300BA | 2020.013 |
